TL;DR
Get home appliances delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
A Hunker report describes a TikTok DIY in which one secondhand wood board is turned into matching doors for open bathroom shelving. The method involves fitting hinges to the full board before cutting it into panels, then adding edge banding and a finish; measurements and installation support depend on the shelving.
One reclaimed wood board can be made into a set of matching doors for open bathroom shelves, according to a DIY project featured by Hunker. The method, shared by TikTok user John Dolechek, uses a continuous board to keep the wood grain aligned across the panels, offering a way to conceal stored items without commissioning a custom cabinet door.
The report says the board shown appears to be roughly 1-by-16 inches and about six feet long, though those are estimates from the project, not a required size. The right dimensions depend on the shelving opening. Hunker advises measuring its overall width and height and accounting for lumber’s actual dimensions: a nominal 1-by-16 board is typically about three-quarters of an inch thick by 15.25 inches wide.
The project uses soft-close European hinges, with a pair for each door panel and an additional hinge for a taller panel that needs more support. The maker can source suitable wood from architectural salvage stores, Habitat for Humanity retail stores, Facebook Marketplace or leftover material from another project, the report says. Paint, stain, optional handles and edge banding are also among the listed materials.
For a stained finish, Hunker recommends laying out the hinges and marking the intended panel divisions on the uncut board first. The board is mounted as one piece, the cut lines are marked, and it is removed for cutting into individual doors. After cutting, the panels are sanded, fitted with edge banding and finished. The report also describes painting as an alternative; in that case, the full-board hinge installation can be skipped in favor of measuring and cutting the panels first.
A Matched Look With Less Custom Work
The appeal is both practical and visual: doors hide everyday bathroom supplies, while cutting the panels from one board can preserve a continuous grain pattern when they are closed. That may help a storage niche look more like built-in cabinetry than a collection of mismatched fronts. It also gives a secondhand or leftover board a new use.
This is a DIY approach, not a guarantee of a low-cost or straightforward installation. The board must fit the opening, and the hinges need a secure mounting surface. The project can offer an alternative to buying a custom door, but the source does not provide a total cost, time estimate or evidence that the method suits every bathroom layout.
European soft-close cabinet hinges
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
How the One-Board Method Works
Open bathroom niches are often built with fixed dividers, so the report describes several door layouts: one panel per shelf section, panels that cover groups of sections, or a single tall door. Choosing the layout affects how many hinges and panels are needed, as well as how the doors will open and meet the shelving.
For the stained version, the order of work is central to the idea: fit the hinges to the board and install it as one piece before cutting the panels apart. This makes it possible to mark the cuts against the installed opening and retain the alignment of the board’s grain. Hunker says a 35-millimeter Forstner bit can be used for the concealed hinge cup holes, or a concealed-hinge jig can help guide the drilling.
After the board is taken down and divided, edge banding covers the exposed cut edges, and stain or paint provides the final appearance. Hunker suggests finishes that match trim or walls, as well as an accent color. Those are design options described in the report, not tested outcomes.
““one cohesive appearance and grain pattern””
— Hunker, describing the TikTok project
reclaimed wood bathroom cabinet doors
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
Fit and Installation Depend on the Niche
The source does not specify the exact board dimensions, finished project cost, total installation time or whether the TikTok user encountered problems after completing the doors. The reported board size is an estimate, and readers would need to measure their own niche before buying material.
It is also not clear how the method would work with every shelving frame or wall construction. Hunker says to mount the hinges to the niche’s inner frame if it has one, or locate the vertical stud framing the opening for support. The source does not provide a universal hinge placement plan, a load rating or guidance for unusual layouts. The final result will depend on accurate measurements, suitable mounting points and the chosen door arrangement.
As an affiliate, we earn on qualifying purchases.
Measure Before Choosing Materials
Anyone considering the project would first need to measure the opening and decide whether to use one door, grouped panels or a panel for each shelf. They can then find a board large enough to cover the planned area and select hinges suited to the panel size and mounting surface. The source gives no follow-up schedule or indication of further updates from the creator.
For a stained finish, the sequence described by Hunker is to mark hinge locations, mount the uncut board, mark panel divisions, remove it, cut the panels, sand and apply edge banding before finishing. A painted finish allows the panels to be cut before installation. The project’s success remains dependent on the individual opening and the strength of its frame or stud attachment.
As an affiliate, we earn on qualifying purchases.
Key Questions
How many doors can one board make?
The number depends on the board’s size and the shelving layout. In the example described by Hunker, a board estimated at about six feet long was divided into four panels; that is not a fixed result for other openings.
What kind of hinges does the project use?
The report calls for soft-close European concealed hinges, generally a pair for each panel. It suggests adding a third hinge to taller doors that need extra support.
Why install the hinges before cutting the board?
For a stained finish, fitting the board as one piece lets the maker mark panel divisions while keeping the grain aligned across the closed doors. Hunker says painting permits a different order: cut the panels first, then proceed with installation.
Where can someone find reclaimed wood?
Hunker lists architectural salvage stores, Habitat for Humanity retail stores, Facebook Marketplace and leftover wood from another project as possible sources. The board still needs to be large enough for the measured opening.
Will this method fit any bathroom shelving?
Not necessarily. The board, panel arrangement and hinge mounting must suit the specific niche. The report advises using the inner frame where available or locating the vertical stud that frames the opening, but it does not provide a universal installation plan.
Source: rss
Halloween Picks
halloween
As an affiliate, we earn on qualifying purchases.
